FS 40 Petrol Grass Trimmer

STIHL FS 40 C-E is an entry-level 27.2 cm³ petrol grass-trimmer that outputs 0.7 kW / 1 hp, swings a 420 mm AutoCut C 6-2 EasySpool™ head and still weighs only 4.4 kg, letting home-gardeners edge and tidy smaller lawns for roughly 35 minutes on its 0.34 L tank while emitting just 94 dB(A) sound pressure and 7 / 6.4 m s² vibration.

£269.00

Please enquire for pricing

Secure Payments:

Lightweight, reliable and Easy2Start, the FS 40 C-E gives first-time petrol users STIHL build quality without bulk. A stratified-charge 2-MIX engine delivers plenty of torque yet cuts fuel use by about 20% and exhaust hydrocarbons by half compared with older two-strokes. The curved-shaft layout and 145 cm overall length balance naturally under the supplied loop handle, and the metal spacer guard lets you trim tight up to trees and borders without scalping bark or masonry. Sturdy bump-feed AutoCut C 6-2 reloads fresh 2.0 mm nylon in seconds via STIHL EasySpool®—no disassembly required.

Key Features

  • 27.2 cm³ 2-MIX engine (0.7 kW) – lower fuel and emissions than classic 2-stroke.
  • Easy2Start + primer bulb – gentle-pull starting even after storage.
  • 420 mm cutting circle with AutoCut C 6-2 head.
  • Curved shaft & loop handle – manoeuvres easily round beds and furniture.
  • Clear 0.34 L fuel tank – about 35–40 min trimming per fill.

Technical Highlights

Displacement 27.2 cm³
Power output 0.7 kW / 1 hp
Weight (dry) 4.4 kg
Cutting width 420 mm line • 230 mm blade
Fuel-tank volume 0.34 L
Sound pressure LpA 94 dB(A)
Vibration L / R 7.0 / 6.4 m/s²
Total length 145 cm

Why It’s Perfect for Small Gardens

At just 4.4 kg the FS 40 C-E weighs about the same as a cordless hedge trimmer yet clears a 420 mm swath—so you can edge a 600 m² lawn or tidy 250 m² of rough grass on a single tank, without the recharge delays of battery kit.

Frequently Asked Questions

The AutoCut C 6-2 head cuts a 420 mm swath, ideal for small to medium lawns.

The 0.34 L tank gives roughly 35–40 minutes of trimming at moderate throttle.

Yes—EasySpool® lets you feed fresh 2 mm line through the eyelets and twist the cap; no head disassembly needed.

Absolutely—swap to GrassCut 230-2 or BrushCut 250-3 blades by fitting the metal-blade guard and locking bolt supplied by your dealer.

At 94 dB(A) sound pressure it is louder than battery tools but quieter than most 25 cc petrol trimmers—and well below the 100 dB(A) often cited for pro brushcutters.

KEEP IN TOUCH

Do you have a question you would like to ask us? Simply enter your details and message below and we will be in touch soon.

The above information will be used to respond to your enquiry and is kept private and confidential. We do not disclose your information to third parties.

COME TO VISIT US

Visit our store in Tranent for all your parts, equipment and work wear requirements.
now open!

Monday

8am - 5pm

Tuesday

8am - 5pm

Wednesday

8am - 5pm

Thursday

8am - 5pm

Friday

8am - 5pm

Saturday

8am - 12pm

Sunday

Closed